-
-
NAVIGATION
- Home Page
- Shop by Brand
- Shop by Product
- New Arrivals
- Promotions
- Blog
-
-
-
HELP & SUPPORT
- Help Desk
- Contact Us
- Technical Support
- Returns / RMA Request
-
FDA AUTHORIZED NON-NIOSH RESPIRATORS
10/9/20:
Appenix A: Authorized Imported, Non-NIOSH Approved Respirators Manufactured in China
| FDA
10/7/20:
NPPTL Respirator Assessments to Support the COVID-19 Response
| CDC
NPPTL COVID-19 Response: International Respirator Assessment 6/19/20: The National Personal Protective Technology Laboratory (NPPTL) tested 30 Guangzhou Nan Qi Xing Nonwoven Co., Ltd., model KN-1 KN95 masks using a modified version of NIOSH Standard Test Procedure (STP) TEB-APR-STP-0059 in response to the COVID-19 pandemic to determine the filtration efficiency of non-NIOSH approved respirators and expired NIOSH-approved respirators. Results "The maximum and minimum filter efficiency was 99.91% and 99.32%, respectively. All thirty respirators measured more than 95%." "While filter efficiency shows how well the filter media performs, users must ensure a proper fit is achieved." Read the full report on CDC.gov (PDF) |
MyDigitalDiscount.com - USA Authorized Distributor |
NON-MEDICAL
Nan Qi Xing KN-1 KN95 disposable protective masks are GB2626-2006 standard respirators with ≥ 95% filter efficiency. Their flat foldable design provides effective easy-to-carry respiratory protection against harmful non-oily particles such as dust, powder, pollen, PM2.5 haze/smog particulate, influenza bacteria, droplets, and more.
Each KN-1 KN95 consists of a soft skin-friendly mask body, nose clip, and welded mask belts that provide a secure but comfortable fit. KN-1 masks also function to protect against wind and cold but, please be aware, filter efficiency (BFE) protection provided by this product may be weakened for long-term use and under stretch or wet conditions.
5-Layer Protection
The mask body is divided into five layers: The first layer is polypropylene (PP) non-woven cloth (50g). The second layer is polypropylene (PP) ≥95 melt-sprayed cloth (25g). The third layer is polypropylene (PP) ≥95 melt-sprayed cloth (25g); The fourth layer is hot-air cotton (50g). The fifth layer is polypropylene (PP) non-woven cloth (25~30g).
Nose clip with fine wire wrapped in polyethylene (PE). The mask belts are made of elastic material and the elastic material is made of nylon.
Please Note
KN95 masks are NOT NIOSH approved N95 masks. The CDC has recently stated that KN95 masks may be a suitable alternative when NIOSH N95 masks are not available. Read more.
Features
Instructions For Use
Note: Molding the nosepiece with only one hand may result in less effective mask performance. If mask becomes damaged or breathing becomes difficult, leave the contaminated area immediately and replace the mask.
Warning and Precautions
Resources
Manufacturer | Guangzhou Nan Qi Xing Nonwoven Co., Ltd. |
Product Type | KN95 Protective Mask (non-medical) |
Model Number | KN-1 |
Standard | GB2626-2006 |
Mask Type | Flat-fold Ear Strap Style |
Materials | 42.5% Non-woven 29% Metlblown non-woven 28.5% Thermal bonded non-woven |
Filter Layers | Layer 1: 50g
Polypropylene non-woven cloth Layer 2: 25g Polypropylene ≥95 melt-blown cloth Layer 3: 25g Polypropylene ≥95 melt-blown cloth Layer 4: 50g Hot-air cotton Layer 5: 25~30g Polypropylene non-woven cloth |
Filtering Rate | ≥ 95% BFE |
Differential Pressure | < 21.0 Pa/cm2 |
Use Time | 4-8 Hours |
Mask Dimensions | 155 x 100 mm |
Size | One Size (General Adult Size) |
Color | White |
Ear Loops | Nylon Elastic |
Storage | Keep out of sunlight, contamination, and high temperature. Store in an environment not exceeding 80% RH. |
Shelf Life | 2 Years |
Country of Origin | China |
• 50 Nan Qi Xing KN-1 KN95 GB2626-2006 Disposable Non-Woven Protective Face Masks