MyDigitalSSD 480GB SBXe Single-Sided 42mm (2242-S2-M) M.2 PCI Express 3.1 x4 (PCIe Gen3 x4) NVMe SSD - MDNVME42-SBXe-0512

SBXe | M.2 2242-S2-M | PCIe 3.1 x4 NVMe SSD | PHISON E13T Controller

RAISING EXPECTATIONS

MyDigitalSSD Super Boot eXpress Eco (SBXe) PCIe 3.1 x4 NVMe M.2 SSDs look to raise the expectations of what consumer-grade performance can be by delivering up to 4X the speed of SATA SSDs.

Powered by the Phison E13T (PS5013-E13T) controller, SBXe solid state drives pair 3D NAND flash with the NVMe 1.3 interface to maximize bandwidth and boost system responsiveness while lowering latency and power consumption for sustained performance under any workload.

Get more out of your desktop, notebook, or 2-in-1 by upgrading to an SBXe today.

PHISON E13T CONTROLLER

The Phison E13T controller was designed to provide an enhanced user experience at a competitive cost, without sacrificing quality. The E13T safeguards data with end-to-end data path protection, thermal throttling, and a powerful low-density parity-check (LDPC) ECC algorithm for improved drive reliability - preventing data corruption while maintaining peak performance and low power consumption.

Additionally, the E13T controller supports APST, ASPM, and L1.2 power saving modes to maximize notebook battery life along with the Secure Erase command to sanitize all user data and restore factory settings.

OP FOR TOP PERFORMANCE

Super Boot eXpress Eco series SSDs dedicate a small allotment of NAND flash to assist the E13T controller in maximizing performance and IOPS when managing program/erase (P/E) cycles.

This method of over-provisioning helps maintain peak performance with enhanced reliability and endurance throughout the life of the drive.

PCI EXPRESS® GEN 3 x4 INTERFACE

MyDigitalSSD SBXe SSDs use a four-lane PCIe 3.1 interface for an improved computing experience; delivering optimal throughput performance and latency for a consumer solid state drive.

Built with scalability in mind, SBXe drives are backwards compatible with PCIe 3.0, 2.0, and 1.1; limited only by their respective bandwidths.

NVM EXPRESS® REVISION 1.3

Designed from the ground up to deliver high bandwidth and low latency storage access, NVMe revision 1.3 fully utilizes the benefits of non-volatile memory that improves sequential and random speeds to meet today's high-performance computing demands.

Unlike most SATA-based solid state drives, the Super Boot eXpress Eco series offers users uncompromised performance that saves power even when faced with data-intensive workloads.

POWER AND VERSATILITY

MyDigitalSSD SBXe drives can be used as a boot device in a variety of systems with a free PCIe 2.0 or 3.0 M.2 socket, including Z97 / X99 / Z170 / Z270 based motherboards, modern notebooks, and small form factor PCs like the Intel® NUC.

They can also serve as added ultra-high-speed storage in desktops with a spare PCIe slot combined with a PCIe adapter.

SINGLE-SIDED DESIGN

Featuring a thin single-sided M.2 2242 form factor, MyDigitalSSD SBXe SSDs increase storage capacity while saving space for other components in any ultra-portable laptop or desktop workstation with an M.2 connection.

SPREAD THE WORD

Share your SBXe experience with others using hashtag: #SBXeSSD

Features

• Phison E13T Controller
• 3D NAND Flash
• PCI Express® 3.1 x4 Interface
• NVM Express® Revision 1.3
• Easy-to-Install M.2 2242 Form Factor
• Slim Single-Sided Design: 42 x 22 x 2mm
• Over Provisioned for Guaranteed Performance
• End-to-End Data Path Protection
• Static and Dynamic Wear Leveling
• Bad Block Management
• Thermal Throttling
• SmartZIP™ Support
• SmartRefresh™ Support
• SMART and TRIM Command Support
• APST, ASPM, and L1.2 Power Saving Mode Support
• Secure Erase
• Windows and OSX Support
• 5 Year Limited Warranty

• MyDigitalSSD SBXe PCIe 3.1 x4 NVMe M.2 2242 SSD
• Screwdriver
• Screw

• 5 Years / 400 TBW Limited Warranty