MyDigitalSSD 1920GB BPX Pro 80mm (2280-S3-M) M.2 PCI Express 3.1 x4 (PCIe Gen3 x4) NVMe SSD - MDNVME80-BPXP-2T

BPX Pro | M.2 2280-S-M | PCIe 3.1 x4 NVMe SSD | PHISON E12 Controller

PUSHING THE LIMITS

MyDigitalSSD Bullet Proof eXpress (BPX) Pro NVMe solid state drives push the limits of PCIe 3.1 data transfer by offering best-in-class sequential read/write speeds in excess of 3GB/s (3,000MB/s) with blistering 4K random speeds ideal for performance seeking gamers, DIY PC enthusiasts, overclockers, and graphics professionals.

Powered by the next-gen Phison E12 PCIe Gen3 x4 NVMe controller, BPX Pro SSDs combine 3D NAND flash with NVMe 1.3 interface protocol to maximize bandwidth while lowering latency and power consumption for unprecedented system responsiveness, shorter boot times, faster application launches, and enhanced browsing with cooler idle temperatures compared to the first BPX series.

Raise your performance expectations, experience a BPX Pro today.

3D NAND FLASH

Using Toshiba BiCS3 TLC NAND inside, the BPX Pro outperforms 2D NAND SSDs with enhanced write/erase endurance for higher efficiency and better reliability over the life of the drive.

PHISON E12 CONTROLLER

Called "Phison’s best SSD controller to date", the Phison E12 (PS5012-E12) PCIe Gen3 x4 NVMe controller incorporates the latest and greatest in engineering technologies to help the BPX Pro deliver best-in-class write speeds backed up by end-to-end data path protection, enhanced error correction, bad block management, and advanced wear leveling to ensure data integrity during high-speed transfers over an extended drive life span.

Additionally, the E12 controller supports AES-256, TCG Opal, and TCG Pyrite encryption for secure file storage along with APST, ASPM, and L1.2 power saving modes to maximize notebook battery life.

OVER PROVISIONED FOR GUARANTEED PERFORMANCE

Each BPX Pro dedicates a small allotment of NAND flash to assist the E12 controller in maximizing performance and IOPS when managing program/erase (P/E) cycles.

This method of over-provisioning guarantees sustained peak performance with enhanced reliability and endurance throughout data-intensive workloads.

PCI EXPRESS® GEN 3 x4 INTERFACE

MyDigitalSSD BPX Pro SSDs use a four-lane PCIe 3.1 interface to optimize your computing experience; delivering unmatched throughput performance compared to other solid state drives, making them the perfect solution for the gaming and high-end PC market.

Built with scalability in mind, BPX Pro drives are backwards compatible with PCIe 3.0, 2.0 and 1.1; limited only by their respective bandwidths.

NVM EXPRESS® 1.3 INTERFACE PROTOCOL

Designed from the ground up to deliver high bandwidth and low latency storage access, NVMe revision 1.3 fully utilizes the benefits of non-volatile memory that improves sequential and random speeds to meet today's high-performance computing demands.

Compared to SATA-based solid state drives, the NVMe BPX Pro provides lower power consumption and higher IOPS, providing users with a more responsive computing experience in any environment.

POWER AND VERSATILITY

The BPX Pro can be used as both a boot device or ultra-high-speed secondary storage in virtually any system with PCIe M.2 M connectivity, including Z97 / X99 / Z170 / X299 / B360 / Z370 based motherboards, laptop notebooks, and small form factor PC's like the Intel® NUC.

They can also serve as on-the-go portable storage combined with an external USB PCIe SSD enclosure.

SPACE SAVING DESIGN

MyDigitalSSD BPX Pro SSDs utilize the light and compact M.2 2280 form factor to increase storage capacity while saving space for other components in any ultra-portable laptop or desktop workstation with a M.2 M connector.

SPREAD THE WORD

Share your BPX Pro experience with others using hashtag: #BPXPRO

Features

• Phison E12 (PS5012-E12) Controller
• Toshiba 3D TLC NAND Flash
• NVM Express® 1.3 Protocol
• PCI Express® Gen 3 x4 Interface
• Easy-to-install M.2 2280 Form Factor
• Over Provisioned for Guaranteed Performance
• End-to-End Data Path Protection
• Static and Dynamic Wear Leveling
• Bad Block Management
• Thermal Throttling
• SmartECC™
• SmartRefresh™
• Drive Log
• UART / GPIO
• APST, ASPM, and L1.2 Power Saving Mode Support
• AES-256, TCG Opal, TCG Pyrite Encryption Support
• SMART and TRIM Command Support
• Windows & OSX Support
• 5 Year Limited Warranty

Reviews & Awards

"A strong NVMe SSD that leads other TLC-based drives in application performance” Chris Ramseyer, TweakTown
“The BPX Pro is a great SSD for prosumers and media content creators. The drive offers a good balance of power efficiency, comes with a five-year warranty, and given its competitive pricing, it delivers an impressive performance to endurance ratio.“ Sean Webster, Tom's Hardware
“With a performance as high and price as low as the MyDigitalSSD BPX Pro has to offer, it will be hard to resist getting just one.” Bohs Hansen, eTeknix
“Overall, the BPX Pro offers good performance at a competitive price, and should be strongly considered, especially for budget-minded system builds.” Allyn Malventano, PC Perspective
“The new Phison E12 firmware looks offer a nice performance bump in most areas that we have looked at so far.” Nathan Kirsch, Legit Reviews

Speed Testing

Test Environment

Test Environment: MSI Z270 SLI Plus / Intel Core i7-7700K 4.2GHz / 32GB RAM / Windows 10 Pro 64-bit / M.2 Turbo Port. Driver: Samsung NVMe.

CrystalDiskMark 5.2.1 x64 Benchmark

ATTO Benchmark v3.05

Firmware Update

Get the latest BPX Pro firmware for best performance! Need help checking your firmware? Read this guide.

• MyDigitalSSD BPX Pro PCIe 3.1 x4 NVMe M.2 2280-S-M SSD
• SSD Mounting Screw
• Screwdriver
• MyDigitalSSD BPX Pro Sticker Badge

• 5 Years / 3,115 TBW Limited Warranty