Reliable Performance in Any Environment
Ruggedized flash products designed to perform
consistently under conditions of extreme
temperature, shock, vibration, and humidity.
Introducing ATP Industrial Grade CF Cards, the
world's most reliable CompactFlash Cards
optimized for demanding industrial applications
such as military, automotive, marine navigation,
aviation, where mission-critical data requires
the highest level of reliability, durability,
and data integrity.
ATP's SIP (System-In-Packaging) manufacturing
process encapsulates all exposed components and
points of failure to ensure the products are
fully waterproof, shockproof, and ESD
(Electro-Static Discharge) proof. ATP Industrial
Grade CF Cards can withstand at least a storage
temperature range of -40 to 85 degrees Celsius
and an operating temperature range of at least
-25 to 85 degrees Celsius.
In addition to this temperature range, the
cards are completely waterproof, dustproof, and
ESD (Electro-Static Discharge) proof. All ATP
Industrial Grade CF cards are produced under a
stringent RoHs and Green Package compliant
manufacturing process to guarantee a consistent
high level of build quality and performance.
Fixed Disk/True IDE Compatibility
ATP Industrial Grade CF cards allow for full
Fixed Disk/True IDE compatibility, including
interface modes PIO up to mode 6, MW-DMA up to
mode 4, and UDMA up to mode 5. This mode allows
for seamless integration of CF cards as bootable
solid state storage.
High Speed
ATP Industrial Grade flash cards deliver outstanding performance with data transfer rate up to 45MB/sec.
Highly Reliable
All ATP Industrial Grade CF, SD, USB drives, and
SSDs are constructed using best-in-class
SLC(Single-Level Cell) components with enhanced
Error Correction Code(ECC) functions and wear
leveling algorithms. This results in MTBF
ratings over 2 million hours and the highest
write cycle lifetimes in the industry. ATP's SIP
(System-In-Packaging) manufacturing process
encapsulates all exposed components and points
of failure to ensure the products are fully
waterproof, shockproof, and ESD (Electro-Static
Discharge) proof.
Full Manufacturer Support and Product
Consistency
Being a true manufacturer gives ATP the ability
to support customers with a fixed BOM policy,
ensuring both consistent compatibility and
performance. ATP also fully supports its
customers with product customization and tuning
to optimize performance in particular or
specialized applications.
When your business counts on your products performing 100% of the time no matter the conditions
or time in the field don't take any chances use ATP SLC Industrial Grade Flash Products. Please
read this presentation for more detailed information on ATP industrial grade SLC flash products
vs consumer grade flash products.
ATP SSD Industrial Product Line-up
SLC Industrial Grade Flash vs. MLC Commercial Grade Flash
|
|
 |
|
ATP Part Numbers |
AF8GCFI |
|
Capacity |
8GB |
|
Connector Pin |
50 Pins |
|
Durability |
Dust Proof: Yes
ESD Proof: Yes |
|
Electrical Characteristics |
Power Supply Voltage
(Recommended Operation
Condition): 3.0V - 3.6V,
4.5V-5.5V
Low Power Consumption (less than 50mA)
Clock speed: 50Mhz max. |
|
Environmental Characteristics |
Operating Temp: -40C to 85C
Storage Temp: -40C to 85C
Humidity: 8 - 95 %
non-condensing
Vibration: 30Gs peak-to-peak Max
Shock: 3,000G Max |
|
Performance |
Transfer Speed: Up to 45MB/sec
(300x) (UDMA mode 5) |
|
True IDE (fixed disk) Mode
Compatibility |
PIO: Up to Mode 6
(U)DMA: Up to Mode 5 |
|
Reliability |
MTBF (mean time between
failures): 2,000,000 hours
Number of insertions: 20,000
minimum
Data retention: 10 years
Endurance: >2,000,000 cycles
(read/write and erase)
ECC: 4-bit
Reserve/Bad Block Management |
|
Physical Characteristics |
Protected Switch: yes
Length:36.4mm 0.15mm
Width: 42.8mm 0.10mm
Thickness: 3.3mm 0.10mm
Weight: 9.0 gram typical |
|
 |
• ATP 8GB Industrial Grade Compact Flash Card
|
|
 |
|
|
 |
|
|
